ScentFlow® Diffusion Candle

PRODUCT FEATURES

ScentFlow® Diffusion Candle with Scent Slice® Fragrance Disk

Fragrance & Candlelight with fragrance fan & timer

Renewable. Rechargeable. Rewarding.

• Timer for Flickering LED turns candlelight o¬ff when not needed.
• Timer for fan sets ideal frequency for diff¬using fragrance.
• Built-in rechargeable battery.
• USB cable (included) provides power and recharges battery.
• Red blinking light signals time to recharge.
• Scent Slice ® fragrance disk lasts up to 30 days and is easy to replace.
Operating Instructions:

To charge or use with USB Power:
• Insert the micro end of the included USB cable into the USB port at the bottom of the unit.
• Plug macro end of the USB cable into a USB port or adapter.
• For continuous ScentFlow® di-ffusion, leave unit plugged in.
• Red light signals unit is charging, green means unit is charged and ready for use o¬ff-outlet.
• Red light blinking signals time to recharge.

Inserting the Scent Slice® Fragrance Disk:
1. Remove Scent Slice® from barrier bag.
2. Place center opening of Scent Slice® over the LED bulb.
3. As fragrance fades, simply replace Scent Slice®.
4. Store unused Scent Slice® in a sealable container or bag to preserve fragrance.

Note: For a stronger fragrance experience, two Scent Slices can be used. Combine two different fragrances to create your own custom scent! Scent Slice do not require melting or softening to release their fragrance.

Set Flickering LED “On” Time:
ScentFlow’s LED candle glow is controlled by the switch positions under the light bulb icon on the bottom panel of the unit.

Position 0: LED is off.
Position 1: LED is on for 4 hours every 24 hours.
Position 2: LED is on for 6 hours every 24 hours.
Position 3: LED is on for 8 hours every 24 hours.
Position 4: LED is on constantly until another option is selected, or the power is interrupted.

Note: Each time the LED “on” time selection is made, the LED will blink to indicate the chosen setting. One blink for Position 1; 2 blinks for Position 2, etc.

strong>Set Fragrance Fan Frequency
The fan frequency is controlled by the switch under the fan blades icon on the bottom of the unit.

Position 0: fan is off.
Position 1: fan to diff¬use scent for 1 minute every 15 minutes.
Position 2: sets fan to diff¬use for 1 minute every 10 minutes.
Position 3: sets fan to di¬ffuse for 1 minute every 5 minutes.
Position 4: allows the fan to run constantly until another selection is made.

Note: Each time a FAN frequency selection is made, the LED will blink to indicate the chosen frequency. One blink for selection “1”, 2 blinks for selection “2”, etc.
Your safety and satisfaction with our products are very important to us.

CAUTION: When using electric products, basic precautions should always be followed. Do not put fingers, hands or foreign objects into unit while it is operating or plugged in. Do not immerse in water. Do not use unit if broken or cracked. Do not leave unit unattended.

CAUTION: EYE AND SKIN IRRITANT. Fragrance-bearing products may contain residual oils that could irritate eyes and skin. Wash hands after handling. If eye irritation occurs, flush with water for 15 minutes. If skin irritation occurs, wash a¬ffected area with soap and water. If irritation persists, consult a physician. KEEP OUT OF REACH OF CHILDREN AND PETS. Do not place directly on flat surfaces as staining could occur.

KEEP OUT OF REACH OF CHILDREN AND PETS.
  • Looks like a candle, works like a fragrance fan diffuser
  • Rechargeable battery lasts 24 hours – use any type “A” USB cord to recharge
  • Low battery light signals when time to recharge.
  • Fan frequency settings allow for fragrance release every 5, 10 or 15 minutes
  • Light settings allow for 4, 6, or 8 hours of operation, or always on
  • Multiple wax sleeve options
  • Safe for households with children and pets.
  • Up to 30 days of fragrance release with each Scent Slice® Fragrance Disk. (1 included)
  • Custom wax sleeves, faux mercury glass pillar and remote control options also available