Set-up Instructions: The Esprit de Fleur Nebulizer is designed to be used with a 10mL bottle of your favorite essential oil. 1) Remove the existing euro-dropper insert from the essential oil bottle. We’ve provided a handy pry tool to make this less messy.

2) Insert a siphon fitted with a gasket (provided), long-end into the bottle.

3) Remove the outer resin sleeve of the Nebulizer by sliding the raised latching button toward the center of the unit’s top panel.

4) Lift the outer sleeve from the unit and set aside.

5) Screw the essential oil bottle, now fitted with a siphon and gasket, into the device until the bottle is securely in place.

6) Replace the outer resin sleeve on the unit and slide the raised latching button back out, to ensure the sleeve is securely locked in place.

7) Attach the USB-C end of the USB cord to the device and plug the large end into a USB port or 5V USB adapter (adapter is not provided). The device is now ready to use.

The Nebulizer has two function buttons: a Power button and an Intensity button

1. Turn-on the Nebulizer by pressing the Power button once.

NOTE: The device will start on the Low setting indicated by the lighted Intensity icon.

2. Select your scent diffusion level by pressing the Intensity button to toggle to your desired cycle time: low, medium, or high.

NOTE: The intensity level is displayed by the lighted icons indicating low, medium, and high.

Cycle times for each intensity level are as follows:

Low: 30 sec (on), 4 min 30 sec (off) Med: 45 sec (on), 3 min 15 sec (off) High: 1 min (on), 2 min (off)

NOTE: The unit will automatically shut down after 8-hours.

3. Set ambient lighting effect by pressing the Power button once to turn-on and once to turn-off lighting.

4. Turn-off the unit by pressing and holding the Power button for 3-seconds.

How to Clean - 3 Simple Steps: Once a month you should clean your nebulizer to keep it running well and to adhere to the terms of the one-year limited warranty.

1. Using the enclosed cleaning bottle, fill it with household isopropyl alcohol (at least 60% concentration).

a. Insert a siphon, fitted with a gasket, into the bottle.

2. Screw the filled cleaning bottle into the device ensuring the bottle is securely in place.

3. Turn-on the nebulizer and allow to run for 10-minutes on the low intensity level.

When finished, dispose of any remaining alcohol. CAUTION: Do not put your face near the unit during the cleaning cycle.

CAUTIONS:

• Never use carrier oils in the Nebulizer. Be sure that any premade blends you plan to use are not diluted with carrier oils as carrier oils do not evaporate.

• Always place your Nebulizer on a flat and secure surface away from heavy traffic.

• Always use a UL Certified 5V USB-C adapter to ensure proper power to the unit.

• Keep out of reach of children and pets.

• Turn-off the unit when not in use.